$84 Meters Clamp Ammeter DC/AC Leakage Current Measurement. Electric Industrial Scientific Test, Measure Inspect Electrical Testing $84,Industrial Scientific , Test, Measure Inspect , Electrical Testing,/beamlet4799786.html,bartending.com,Clamp,Current,Leakage,Meters,Ammeter,Measurement.,DC/AC,Electric Meters Clamp Ammeter DC AC Leakage Measurement. Current Electric Popular brand in the world Meters Clamp Ammeter DC AC Leakage Measurement. Current Electric Popular brand in the world $84,Industrial Scientific , Test, Measure Inspect , Electrical Testing,/beamlet4799786.html,bartending.com,Clamp,Current,Leakage,Meters,Ammeter,Measurement.,DC/AC,Electric $84 Meters Clamp Ammeter DC/AC Leakage Current Measurement. Electric Industrial Scientific Test, Measure Inspect Electrical Testing

Meters Clamp Ammeter DC AC Leakage Measurement. Current Washington Mall Electric Popular brand in the world

Meters Clamp Ammeter DC/AC Leakage Current Measurement. Electric

$84

Meters Clamp Ammeter DC/AC Leakage Current Measurement. Electric

|||

Product description

Function  Measurement of current, leakage current
 Power Supply  6F22,9V
 Test Mode  Clip-on CT, integral mode
 Clamp Size  Φ7mm
 Measurement Range  0mA-60.0A
 Resolution  1mA
 Accuracy  ±2%rdg±5dgt (23℃±5℃, below 75%rh)
 Display Mode  Four digits LCD display
 Dimension  LWH: 168mm×65mm×34mm
 LCD Dimension  35mm×21.5mm; display domain: 32mm×15mm
 Sampling Rate  2 times/s
 Frequency  AC: 45Hz-400Hz
 Polarity Indication  DC current auto identified and display“—”
 Test Position  Tested wire in the jaw center
 Range Shift  Automatically
 Line Voltage  AC600V
 RS232 Interface  Data stored in the memory of the meter via RS232 upload to PC
 Com-Configure  Baud rate:9600, data bit:8, stop bit:1
 Data Memory  99units, FULL blinks when the memory is full
 Reading Hold  DH indicating the reading is hold
 Out of Range  OL indicating the current is out of range
 Auto Power-off  5 Minutes after power on, it will power off automatically to lower the power consumption
 Battery Voltage  Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
 Weight  180g
 Working Current  10mA
 Consumption  10mW
 Working Temperature and Humidity  -10℃-50℃,below 80%rh
 Limit Temperature Error  -10℃-0℃ and 40℃-50℃, within 2%rdg
 Storage Temperature and Humidity  -10℃-60℃,below 70%rh
 Insulating Strength  AC2kV/rms (between the alloy of the clamp and the housing)
 Applicable safety rules  IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Meters Clamp Ammeter DC/AC Leakage Current Measurement. Electric

Latest

Latest

Share Tweet